ar8820p2000m

Remove/install front bumper

Type ar · topic 88.20 · version 0109 · 2004-03-19

Applies to: MODEL 215.373 /374 /375 /376 /378 /379 MODEL 220.025 /026 /028 /063 /065 /070 /073 /075 /125 /128 /165 /170 /173 /175 /176 /178 /179 /875 /878

Where it sits

Function group 3 Body › 88 Detachable body components, exterior flaps › 88.20 Bumpers — Series 215 (models 373, 374, 375, 376, 378, 379) · Series 220 (models 025, 026, 028, 063, 065, 070, 073, 075, 125, 128, 165, 170, 173, 175, 176, 178, 179, 875, 878)

EinPAS 35 Body/frame/detachable parts › 35.38 Bumper/spoiler/outer trim/stowage box/front protective paneling › 35.38.30 Front bumper — Series 215 (models 373, 374, 375, 376, 378, 379) · Series 220 (models 025, 026, 028, 063, 065, 070, 073, 075, 125, 128, 165, 170, 173, 175, 176, 178, 179, 875, 878)

AR88.20-P-2000M

Remove/install front bumper

11.6.97

MODEL 215.373 /374 /375 /376 /378 /379

MODEL 220.025 /026 /028 /063 /065 /070 /073 /075 /125 /128 /165 /170 /173 /175 /176 /178 /179 /875 /878

Remove/install front bumper

P88.20-2248-09

Model 220

1 Bumper

1 A Foam insert

3 Nut

11 Antenna line

1 B Retaining plate

2 Bolt

Remove/install front bumper

P88.20-2020-09

Model 220

4 Air inlet grille

5 Bracket

B14 Outside temperature display temperature sensor

X26/27 Front bumper PTS connector

6 Bolt

7 Retaining bracket

Remove/install front bumper

P88.20-2079-07

Model 215

8 Cover

10 Bolt

9 Expansion rivets

Remove/Install

Danger!

Risk of death cased by vehicle slipping or toppling off of the lifting platform.

Align vehicle between the columns of the hydraulic hoist and position the four support plates below the hoist support points specified by the vehicle manufacturer.

AS00.00-Z-0010-01A

1

Expose antenna line (11) for TV antenna

Electrical plug socket in left fuse box.

Installation: Install new tie straps.

2.1

Remove bottom engine compartment paneling

Engine 112, 113, 137, 275

AR61.20-P-1105M

Only remove front part

3.1

Remove bottom part of noise encapsulation

Engine 613, 628, 648

AR94.30-P-5300M

Only remove front part

4

Pull outside temperature display temperature sensor (B14) out of bumper

5

Unlock and separate front bumper PTS connector (X26/27)

To unlock, pivot lock flap in direction of arrow.

6

Remove fender liner from front fender

Remove only front section of fender liner.

AR88.10-P-1300M

7

Unscrew bolt (6)

8

Pivot retaining bracket (7) toward center of vehicle, pull out to rear and remove

9.1

Remove expansion rivets (9) and cover (8)

Model 215

10.1

Remove bolt (10)

Model 215

11

Unscrew bolt (2)

12

Unclip air inlet grate (4)

Do not damage paint.

13

Unscrew nuts (3).

14

Remove bumper (1) toward front

Installation: Ensure that retainer tabs on rear bumper (1) are pushed behind bracket (5)

15.1

Modify AMG bumper

See installation instructions for accessories:

Model 215

Retrofit AMG trims

AZ88.00-P-0001K

Model 220

Retrofit AMG trims

AZ88.00-P-0001F

16

Install in the reverse order

Referenced documents