Remove/install front bumper · ar8820p2000gh · Mercedes-Benz WIS

AR88.20-P-2000GH

Remove/install front bumper

14.3.97

MODEL 163.113 /154 #A up to 289564,
163.113 #X up to 754619,
163.154 #X up to 716524,
163.136 /172 except CODE (U49) Styling package

P88.20-0375-09

1 Nut

2 Nuts

1a Screw

 	Remove/Install
1.1	Remove brush guard together with underride guard	 If installed.	AR88.30-P-2000-01GH
			*BA88.30-P-1002-01A
			*BA88.30-P-1003-01A
			*BA88.30-P-1011-01A
			*BA88.30-P-1015-01A
			*BA88.30-P-1016-01A
2	Unscrew nut (1)	 Left and right at inside.
			*BA88.20-P-1001-01B
3	Unscrew bolt (1a)	 Left and right at inside.
			*BA88.20-P-1002-01B
4	Remove front bumper grille.	 Carefully remove front bumper grille so that bumper grille and bumper grille mount cannot be damaged.  Loosen retainers and pull to outside
		 Pulling hook	*140589023300
5.1	Remove outside temperature sensor from front bumper.	 If installed.
6	Unscrew nuts (2)		*BA88.20-P-1003-01B
7	Remove bumper toward front.	Do not damage paint.
8	Install in the reverse order

 Detachable body components, underride guard

Number	Designation		Model 163 up to 31.8.01


BA88.30-P-1002-01A	Nut, spacer tube on brush guard	Nm	86
BA88.30-P-1003-01A	Screw, mount on brush guard	Nm	49
BA88.30-P-1011-01A	Bolt, underride guard to brush guard	Nm	25
BA88.30-P-1015-01A	Nut, underride guard to bracket	Nm	49
BA88.30-P-1016-01A	Bolt, front section of underride guard to rear section of underride guard	Nm	49

 Bumper

Number	Designation		Model 163


BA88.20-P-1001-01B	Nut, front bumper on outer mount	Nm	8
BA88.20-P-1002-01B	Screw for front bumper on inner mount	Nm	1.5
BA88.20-P-1003-01B	Nut, front bumper on frame	Nm	8

Pulling hook

140 589 02 33 00