Remove/install front bumper

AR88.20-D-2000F

Remove/install front bumper

02.05.2018

Model

909

Shown on model 909 up to 28.02.2018 with code J65 (outside temperature display)

1

License plate number

2

Expansion rivet

3

Bolts

4

Bumper

5

Guide

6

Connector

7

Outside air temperature sensor

Shown on model 909 as of 01.03.2018 with code L16 (halogen front fog lamp)

3

Bolts

8

Expansion rivet

9

Bolts

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

 

Remove/install

1

Remove screws/bolts (9).

Model 909 as of 3/1/18

2

Remove license plate number (1).

3.1

Remove expansion rivets (2).

Model 909 up to 2/28/18

 Clip remover

*452589016300

3.2

Remove bottom expansion rivets (8).

Model 909 as of 3/1/18

 Clip remover

*452589016300

4

Remove screw/bolts (3).

 Installation: Replace screw/bolts (3).

 Collar screw, front bumper to body

*BA88.20-N-1001-01A

5

Pull bumper (4) toward the front out of the left and right guide (5) until the electrical connectors are accessible.

 Installation: Ensure that bumpers (4) are seated correctly in guides (5).

 Helper required.

6

Release plug (6) from outside air temperature sensor (7) and disconnect.

Model 909
with code J65 (Outside temperature display)

7

Release electrical connectors for the front fog lamps and disconnect.

Model 909
with code L16 (Fog lamps, halogen)
with code MP5 (Engine version Euro 5)

8

Remove bumper (4).

 Helper required.

9

Install in the reverse order.

 Bumper

Number

Designation

Model 909

BA88.20-N-1001-01A

Collar screw, front bumper to body

Nm

23