Remove/install front bumper · ar8820b2000th · Mercedes-Benz WIS

AR88.20-B-2000TH

Remove/install front bumper

12.02.16

Body 958.870 with Vehicle 958.2

W88.20-1034-09

1 Screw

2 Electric connection

3 Edging

4 Cover cap

5 Cover cap

6 Screw

7 Cover

8 Screw

9 Screw

10 Screw

11 Bumper front panel

E8 Left optical set

E9 Right optical set

E18 Front left flashing light

E19 Front right flashing light

	Remove and install
1	Remove the front left flashing light (E18) and the front right flashing light (E19)		AR82.10-B-4725TB
2	Remove the screw (1) from the left optical set (E8) and from the right optical set (E9)
3	Move the left optical set (E8) and the right optical set (E9) to the outside
4	Separate the electrical connection (2) in the left optical set (E8) and in the right optical set (E9)
5	Remove the edging (3)
6	Open the sealing flaps (4, 5)
7	Remove the screws (6)		*BA88.20-B-1001-01C
8	Remove the covers (7)
9	Remove the bolt (8)	 Respectively in the right and left support for the front bumper face bar in the substructure.
			*BA88.20-B-1001-01C
10	Remove the screws (9)	 In the right and left parts of the bumper (11).
			*BA88.20-B-1001-01C
11	Remove the bolt (10)	 In the right and left parts of the bumper (11).
			*BA88.20-B-1001-01C
12	Remove the front bumper face bar	 Left and right parts, as well as other bumper (11) components remain together.
13	Install in the reverse order
	Check
14	Check the left optical set (E8) and right optical set (E9) control. Correct, if required.
	Check headlamps range, set up		AP82.10-B-8260TA

Bumper