P88.10-2056-09
Shown on left rear fender
1 Fender liner
2 Expansion rivets
5 Bolt
6 Mounting wedge
3 Nuts
4 Cover
| Remove/Install | ||
Danger! | Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between the columns of the hydraulic hoist and position the four support plates below the hoist support points specified by the vehicle manufacturer. | |
1 | Raise vehicle. | ||
2 | Remove expansion rivets (2) | ||
3 | Unscrew nuts (3) | ||
4 | Take out cover (4) | ||
5 | Unscrew bolt (5). | ||
6 | Loosen fender liner (1) from rear fender with mounting wedge (6) | | |
Installation: Ensure that fender liner (1) is seated correctly. | |||
7 | Install in the reverse order |
Mounting wedge
110 589 03 59 00
Referenced documents
- as0000z001001a Risk of death caused by vehicle slipping or toppling off of the lifting platform.