ar8810p1400h

Remove/install fender liner in rear fender

Type ar · topic 88.10 · version 0102 · 2006-12-12

Applies to: MODEL 240

Where it sits

Function group 3 Body › 88 Detachable body components, exterior flaps › 88.10 Fenders — Series 240

EinPAS 35 Body/frame/detachable parts › 35.37 Fender › 35.37.40 Fender liner — Series 240

AR88.10-P-1400H

Remove/install fender liner in rear fender

3.7.02

MODEL 240

Remove/install fender liner in rear fender

P88.10-2070-09

1 Fender liner in rear fender

2 Expansion rivets

3 Bolt

4 Nut

5 Expansion rivet

6 Expansion rivet

Remove/install

Danger!

Risk of death. Death may result if vehicle slips or topples from the lifting platform.

Align vehicle between the columns of the hydraulic hoist and position the four support plates below the hoist support points specified by the vehicle manufacturer.

AS00.00-Z-0010-01A

1

Lift vehicle with lifting platform

2

Detach wheels

Left and right rear.

AP40.10-P-4050Z

3

Remove expansion rivet (2)

4

Unscrew bolts (3)

5

Undo nuts (4)

6

Remove expansion rivet (5)

7

Remove expansion rivet (6)

8

Release fender liner (1) with mounting wedge out of rear fender

Installation: Ensure correct seating of fender liner.

Mounting wedge

*110589035900

9

Install in the reverse order

Remove/install fender liner in rear fender

Mounting wedge

110 589 03 59 00

Referenced documents