P88.10-2118-05
1 Fender liner
2 Nuts
3 Clip
| Remove/Install | ||
Danger! | Risk of death cased by vehicle slipping or toppling off of the lifting platform. | Align vehicle between the columns of the hydraulic hoist and position the four support plates below the hoist support points specified by the vehicle manufacturer. | |
1 | Raise vehicle. | ||
2 | Remove clips (3) | Installation: Check clips (2), replace if necessary | |
3 | Unscrew nuts (2) | ||
4 | Remove fender liner (1) | ||
5 | Install in the reverse order |
Referenced documents
- as0000z001001a Risk of death caused by vehicle slipping or toppling off of the lifting platform.