ar8660d0140ec

Remove/install pressure reducing valve

Type ar · topic 86.60 · version 0101 · 2016-06-11

Applies to: Model 903.6 with code ZL9 (James Cook touring camper)

Where it sits

Function group 3 Body › 86 Emergency equipment, diability equipment, sanitary equipment, galley › 86.60 Galley — Series 903 (models 6**)

EinPAS 37 Interior equipment › 37.76 Kitchenette/cool box › 37.76.50 Gas supply — Series 903 (models 6**)

AR86.60-D-0140EC

Remove/install pressure reducing valve

30.05.2016

Model

903.6

with code ZL9 (James Cook touring camper)

Remove/install pressure reducing valve

1

Nut

2

Nut

3

Pressure regulator

D86.60-0188-03

Danger !

Risk of explosion due to escaping combustible gas or overheating of gas cylinders.Risk of injury caused by burns to skin and eyes. Risk of frostbite to body parts caused by escaping gas and by touching components near the valves when emptying gas cylinders. Risk of poisoning or suffocation caused by inhaling gas.

Remove any sources of ignition.
Protective clothing, safety gloves and safety glasses must always be worn.
Ensure that the work area is adequately ventilated.
When working on vehicles at ambient temperatures over 60 °C, all gas cylinders must be removed.

AS00.00-Z-0018-01A

Remove/install

1

Connect safety bottle valve to gas cylinder

See Owner's Manual.

2

Close main shut-off valve in feed line

See Owner's Manual.

3

Unscrew nut (2)

Nut (2) has left-hand thread.

4

Unscrew nut (1) from safety bottle valve

Installation:
Check condition of seal, replace if necessary.
Leaks can occur otherwise.

Nut (1) has left-hand thread.

5

Remove pressure regulator (3)

6

Install in the reverse order

7

Check gas system for leakage

It is necessary that the leaktightness and function test is performed and documented by an authorized specialist after opening the gas system.

Referenced documents