AR86.60-D-0045A | Remove/install stowage cabinet | 12.5.04 |
MODEL 903.662
with CODE (ZU8) National version for USA
with CODE (Z29) "James Cook" touring camper, NAFTA
refrigerator box
D86.60-0052-09
1 Stowage cabinet
2 Bolts
5 Electrical connector
3 Bolts
4 Adhesive
D86.60-0054-04
6 Bolts
| Remove/Install | ||
Danger! | Risk of injury caused by scraping or cutting body parts on sharp vehicle parts | Always wear protective gloves when working on or near sharp and non-deburred vehicle parts. Deburr repair panels. | |
Danger! | Risk of injury caused by body parts becoming jammed, pinched or severed by doors, covers, flaps or by loose components | Keep body parts well clear when moving doors, covers, flaps and components. Wear protective gloves and protective shoes. | |
1 | Switch off refrigerator box | See Operator's Manual | |
2 | Remove moldings from C-pillar | Right side | |
3 | Remove foam material seal in area of bolts (2) | Installation: Use new foam material. | |
4 | Unscrew bolts (2) | ||
5 | Remove refrigerator box cover | ||
6 | Remove bolts (3) | ||
7 | Cut adhesive (4) | Installation: Use suitable adhesive | |
8 | Disconnect electrical connector (5) from refrigerator box | ||
9 | Unscrew bolts (6) | ||
10 | Remove stowage cabinet (1) | Cover interior equipment to prevent damaging the vehicle interior equipment by the stowage cabinet (1). | |
Several helpers required | |||
Lift stowage compartment (1) over kitchen cabinet | |||
11 | Install in the reverse order | ||
12 | Perform a function test | Switch on refrigerator box (see operating instructions) |
Referenced documents
- ar6830d4490a Remove/install paneling on C-pillar
- ar8661d1003a Remove/install refrigerator box cover
- as0000z001701b Risk of injury caused by scraping or cutting body parts on sharp vehicle parts
- as0000z002501a Risk of injury caused by body parts becoming jammed, pinched or severed by doors, covers, flaps or by loose components