ar8630s0091e

Check wastewater container fill level sensor

Type ar · topic 86.30 · version 0100 · 2014-10-01

Applies to: MODEL 447.8 with CODE ZK7 (Equipment line MARCO POLO)

Where it sits

Function group 3 Body › 86 Emergency equipment, diability equipment, sanitary equipment, galley › 86.30 Sanitary equipment — Series 447 (models 8**)

EinPAS 37 Interior equipment › 37.75 Sanitary equipment › 37.75.12 Sensor/switch/wiring harness — Series 447 (models 8**)

EinPAS 37 Interior equipment › 37.76 Kitchenette/cool box › 37.76.12 Sensor/switch/wiring harness — Series 447 (models 8**)

AR86.30-S-0091E

Check wastewater container fill level sensor

19.09.2014

MODEL

447.8

with CODE ZK7 (Equipment line MARCO POLO)

Check wastewater container fill level sensor

1

Electrical connector

2

Float

3

Waste water fill level indicator

B146/1

Wastewater fill level sensor

N10/17

Display unit central electronics

S86.30-4550-05

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

Remove

1

Remove waste water fill level sensor (B146/1)

AR86.30-S-0088E

Check

2

Reconnect electrical connector (1) of waste water fill level sensor (B146/1)

3

Move float (2) to bottom position

4

Read off waste water fill level display (3) on display unit central electronics (N10/17)

The waste water fill level display (3) should not indicate more than one increment.

5

Move float (2) to center position

6

Read off waste water fill level display (3) on display unit central electronics (N10/17)

The waste water fill level display (3) should indicate 2 increments.

7

Remove float (2) to upper position

8

Read off waste water fill level display (3) on display unit central electronics (N10/17)

Wastewater level display (3) should flash and indicate four increments.

9

Disconnect electrical connector (1) from waste wall fill level sensor (B146/1)

Install

10

Install waste water fill level sensor (B146/1)

AR86.30-S-0088E

Referenced documents