AR86.30-D-0072EC | Remove/install wastewater tank water level sensor | 17.3.05 |
MODEL 903.6 with CODE (ZL9) "James Cook" touring camper
D86.30-0056-05
Shown on model 903.662 with national version, USA, code ZU8 and "James Cook" camper, NAFTA code Z29
1 Garbage bag holder
D86.30-0156-08
Shown on model 903.662 with national version, USA, code ZU8 and "James Cook" camper, NAFTA code Z29
2 Bolts
3 Sheet metal
6 Connector
B146/1 Wastewater fill level sensor
4 Floor panel
5 Heater Hose
D86.30-0157-01
8 Thread
9 Float
B146/1 Wastewater fill level sensor
| Remove/install | ||
1 | Unhook garbage bag holder (1) and remove | ||
2 | Unscrew bolts (2) | ||
3 | Remove sheet metal (3) | ||
4 | Remove floor panel (4) | ||
5 | Remove heater hose (5) | ||
6 | Separate connector (6) | ||
7 | Unscrew waste water fill level sensor (B146/2) | Installation: Wrap thread (8) with Teflon tape 5 to 6 times and coat with glue | |
8 | Check waste water fill level sensor (B146/2) for proper function. | Connect waste water fill level sensor (B146/2) with connector (6) and move float (9). Water level sensor in camper operating and display unit (A97) must change. | |
9 | Install in the reverse order |