AR86.30-D-0064ECC | Remove/install water rain shut-off lever | 28.4.05 |
MODEL 903.6 with CODE (ZL9) "James Cook" touring camper
of wastewater tank
D86.30-0199-09
1 Drain valve bottom section
2 Drain valve top section
3 Threaded connection
6 Sewer pipe
7 Connector
4 Bolt
5 Flexible shaft
| Remove/install | ||
Danger! | Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between the columns of the lifting platform and position the four support plates at the lifting platform support points specified by the vehicle manufacturer. | |
1 | Drain wastewater tank | See Owner's manual. | |
2 | Remove cable tie from sewer pipe (6) | Installation: Use new cable ties. | |
3 | Remove sewer pipe (6) | Sewer pipe (6) is inserted into drain valve bottom section (1) | |
4 | Remove bolt (4) | ||
5 | Pull flexible shaft (5) out of coupling (7) | ||
6 | Unscrew threaded connection (3) | Use suitable tool to unscrew screwed connection (3). | |
7 | Remove drain valve bottom section (1) | ||
8 | Unscrew drain valve top section (2) | It is not possible to unscrew the drain valve top section (2) without damage | |
Installation: Replace drain valve top section (2), use suitable sealing tape and suitable glue. | |||
9 | Install in the reverse order |
Referenced documents
- as0000z001001a Risk of death caused by vehicle slipping or toppling off of the lifting platform.