1 | Lifting platform |
2 | Cover |
3 | Thumb screw |
4 | Hand pump pipe |
5 | Terminal 30 electrical connection line |
M86.20-0009-06
| Remove/install | ||
Danger | Risk of fire/risk of explosion due to short circuit and escaping oxyhydrogen gas. Risk of (burn) injury caused by caustic burns to eyes, skin and mucous membranes from battery electrolyte/mist, short circuit and arcing. Risk of poisoning caused by swallowing battery electrolyte or absorption of lead through the skin or body orifices. Risk of death due to voltage U >= 30 V AC and U >= 60 V DC. | No fires, sparks, open flames, or smoking. Wear acid-resistant gloves, clothing, and glasses. Pour battery acid only into suitable and appropriately marked containers. | |
1 | Disconnect battery ground line | ||
Topical note | Notes on battery | ||
2 | Remove hand pump pipe (4), unscrew thumb screws (3) and remove cover (2) from hydraulic unit | ||
3 | Disconnect terminal 30 electrical connection line (5) | ||
4 | Remove linear lift and remove threaded plates under vehicle | Lift linear lift with folded up lifting platform (1) out of vehicle using fork-lift truck. | |
Installation: Provide threaded plates and surrounding areas with new corrosion protection. | |||
Bolt, linear lift to vehicle floor | |||
5 | Install in the reverse order | ||
6 | Check lift function | ||
| |||
7 | Set time on instrument cluster | ||
8 | Set time on timer for auxiliary heater | ||
9 | Code radio |
Referenced documents
- ah5410p000101a Notes on battery
- ah5410p000101a
- ap8620m8653a Check lift function
- as5410z000101a Risk of fire/risk of explosion due to short circuit and escaping oxyhydrogen gas. Risk of (burn) injury caused by caustic burns to eyes, skin and mucous membranes from battery electrolyte/mist, short circuit and arcing. Risk of