ar8620l0100va

Remove/install loading system for folding wheelchair

Type ar · topic 86.20 · version 0101 · 2012-02-24

Applies to: MODEL 414.### 1# with CODE (ZY3) Loading system for folding wheelchairs for handicapped vehicle "Movability"

Where it sits

Function group 3 Body › 86 Emergency equipment, diability equipment, sanitary equipment, galley › 86.20 Disability equipment — Series 414

EinPAS 37 Interior equipment › 37.60 Easy entry and exit feature › 37.60.40 Lift — Series 414

AR86.20-L-0100VA

Remove/install loading system for folding wheelchair

16.2.12

MODEL 414.### 1# with CODE (ZY3) Loading system for folding wheelchairs for handicapped vehicle "Movability"

Remove/install loading system for folding wheelchair

N86.20-2000-09

1 Retaining shackle for wheelchair

2 Electrical connector

5 Loading system for folding wheelchair

3 Bolts

4 Striker for loading system

Remove/Install

1

Remove folding wheelchair

Extend loading system for folding wheelchair (5), release retaining shackle for wheelchair (1) and place wheelchair to side.

2

Retract loading system for wheelchair (5)

Danger!

Risk of explosion caused by escaping oxyhydrogen gas. Risk of injury caused by caustic burns to eyes, skin and mucous membranes from battery electrolyte (contains diluted sulfuric acid) or metal spatter due to short circuit. Risk of burn injuries caused by short circuit. Risk of poisoning caused by swallowing battery electrolyte (contains diluted sulfuric acid) or absorption of lead over the skin or orifices

No fire, sparks, open flames or smoking.

Wear acid-resistant gloves and clothing and safety glasses with side guards.

Do not place any conductive objects on the battery and avoid any short circuit from battery positive to ground.

Only fill liquid battery electrolyte (diluted sulfuric acid) into suitable and appropriately marked containers.

AS54.10-Z-0001-01A

3

Disconnect ground cable of battery

AR54.10-P-0003A

Notes on battery

All models

AH54.10-P-0001-01A

4

Separate electrical connector (2) on loading system for folding wheelchair (5)

5

Unscrew bolts (3)

*BA86.20-P-1001-01A

6

Release striker for loading system (4) upward

Installation: Ensure that striker for loading system is arrested and seated correctly.

7

Lift loading system for folding wheelchair (5) at front, push toward rear and press out of floor mounts

8

Lift and remove loading system for folding wheel chair (5)

Installation: Avoid damaging.

9

Install in the reverse order

10

Perform basic programming

AR54.10-P-0003A

11

Read diagnostic trouble code memory and erase

When the work is complete stored faults must be worked on in the diagnostic trouble code memories and erased. The stored faults may be caused by removed cables during installation or test operations or by simulation.

See

Connect STAR DIAGNOSIS, read out fault memory

AD00.00-P-2000-04A

Diagnosis system STAR DIAGNOSIS

*WH58.30-Z-1048-13A

12

Perform function check

Loading system for folding wheelchair

Number

Designation

Model 414

BA86.20-P-1001-01A

Bolt for loading system on vehicle floor

Nm

49

Commercially available tools

Number

Designation

WH58.30-Z-1048-13A

STAR DIAGNOSIS diagnosis system, Compact Passenger Car

6511 1801 00

Referenced documents