Remove/install ventilation for rear interior compartment

AR83.65-P-1000GL

Remove/install ventilation for rear interior compartment

05.03.2019

Model

461.332/333/334/340/342/344

Modification notes

19.10.2018

"Remove hose (6) from aeration and ventilation housing (1)", added.

Operation step 3

Shown on model 461.332 on left D-pillar

4

Trim piece

Shown on model 461.332 on left D-pillar

5

Bolts

Shown on model 461.332 on left D-pillar

1

Aeration and ventilation housing

2

Screw

3

Clip

Shown on model 461.333 on right D-pillar

1

Aeration and ventilation housing

2

Screw

3

Clip

6

Hose

 

Remove/install

1

Remove trim on D-pillar.

Model 461.332/333/334/340/342/344

Model 461.332/333/334

AR68.30-P-4505GL

2

Release clamp (3) and remove lower drain hose.

3

Remove hose (6) from aeration and ventilation housing (1).

Only when removing right aeration and ventilation housing (1).

4

Unscrew screws (2) and remove trim insert (4).

 Secure trim insert (4) against falling down.

5

Unscrew screws (5) and remove aeration and ventilation housing (1).

6

Check seal for damage.

If damage is present,



Replace seal.

7

Install in the reverse order.