ar8365d2140a

Remove/install evaporator fan

Type ar · topic 83.65 · version 0101 · 2004-07-27

Applies to: MODEL 903.662 with CODE (ZA8) Refrigerator vehicle MODEL 903.662 with CODE (ZA5) Freezer vehicle

Where it sits

Function group 3 Body › 83 Climate control › 83.65 Refrigeration units — Series 903 (models 662)

EinPAS 39 Heating/ventilation/cooling › 39.22 Refrigeration system › 39.22.30 Blower motor/actuator motor — Series 903 (models 662)

EinPAS 39 Heating/ventilation/cooling › 39.22 Refrigeration system › 39.22.32 Housing/heat exchanger/evaporator — Series 903 (models 662)

AR83.65-D-2140A

Remove/install evaporator fan

23.6.03

MODEL 903.662 with CODE (ZA8) Refrigerator vehicle

MODEL 903.662 with CODE (ZA5) Freezer vehicle

Remove/install evaporator fan

D83.65-0040-11

1 Evaporator fan

2 Screw

3 2-pin connector

4 Temperature sensor for load compartment

Remove/Install

1

Remove covering of evaporator in load compartment

AR83.65-D-2010A

2

Detach common 2-pin connector (3) of left and right evaporator fan

3

Unpin connecting cables of evaporator fan to be removed from plug housing

4

Unclip temperature sensor for load compartment (4) on fan housing

Only when removing the evaporator fan with the mounting for the temperature sensor.

Installation: When changing the evaporator fan convert the mounting for the temperature sensor for the load compartment (4) to the fan housing for the new fan.

5

Undo bolts (2) of evaporator fan (1) and remove fan from evaporator housing

6

Install in the reverse order

Referenced documents