Repair materials
Number | Designation | Order number |
BR00.45-Z-1058-01A | Black sealant | A 004 989 33 20 |
D83.65-0005-02
1 Disconnect main ground cable (1) of cooling system from refrigerant compressor (2).
2 Disconnect main positive cable (4) of cooling system from load relay for engine refrigerant compressor (3).
3 Remove all cable straps on main ground and main positive cables (1, 4) and expose cables up to cable duct (5).
4 Remove sealing compound on cable duct (5).
After installation, seal the housing of the cable duct (5) and the cables and wiring harnesses routed there all-round with sealing compound.
5 Remove wiring harnesses covered with insulation tape from the cable duct (5).
6 Route cable duct (5) with main ground and main positive cable (1, 4) downwards in to the load compartment.