ar8360d9010a

Remove/install rear blower regulator

Type ar · topic 83.60 · version 0101 · 2009-11-04

Applies to: MODEL 906.6 /7 with CODE (HH7) Additional air conditioning in rear with CODE (H08) High-performance air conditioning

Where it sits

Function group 3 Body › 83 Climate control › 83.60 Rear heater — Series 906 (models 6**, 7**)

EinPAS 39 Heating/ventilation/cooling › 39.15 Climate control › 39.15.11 Control unit/relay — Series 906 (models 6**, 7**)

AR83.60-D-9010A

Remove/install rear blower regulator

20.10.09

MODEL 906.6 /7
with CODE (HH7) Additional air conditioning in rear
with CODE (H08) High-performance air conditioning

Remove/install rear blower regulator

D83.50-1304-09

1 Inner paneling

2 Dust filter

3 Wiring harness

4 Electrical connector

A32/3 Rear heavy duty automatic air conditioning recirculation unit (with code (H08) High-performance air conditioning)

A32/3a1 Blower regulator (with code (H08) High-performance air conditioning)

A32/2 Rear automatic air conditioning air recirculation unit (with code (HH7) Additional air conditioning in rear)

A32/2a1 Blower regulator (with code (HH7) Additional air conditioning in rear)

Remove/install

1

Remove inner paneling (1)

AR83.50-D-5010B

2

Remove dust filter (2).

3

Unhook electrical wiring harness from bracket (arrow A)

4

Turn blower regulator (A32/2a1 or A32/3a1) counterclockwise, as shown, and remove from rear automatic air conditioning air recirculation unit (A32/2) or rear heavy duty automatic air conditioning recirculation unit (A32/3)

5

Disconnect electrical connector (4) at rear blower regulator (A32/2a1, A32/3a1)

6

Install in the reverse order

Referenced documents