ar8355d7690a

Remove/install refrigerant compressor vibration damper

Type ar · topic 83.55 · version 0100 · 2004-11-02

Applies to: MODEL 903.662 with CODE (ZU8) National version for USA with CODE (Z29) "James Cook" touring camper, NAFTA Refrigerant compressor of roof air conditioning

Where it sits

Function group 3 Body › 83 Climate control › 83.55 A/C compressor — Series 903 (models 662)

EinPAS 39 Heating/ventilation/cooling › 39.15 Climate control › 39.15.40 Refrigerant compressor — Series 903 (models 662)

AR83.55-D-7690A

Remove/install refrigerant compressor vibration damper

22.6.04

MODEL 903.662
with CODE (ZU8) National version for USA
with CODE (Z29) "James Cook" touring camper, NAFTA
Refrigerant compressor of roof air conditioning

Remove/install refrigerant compressor vibration damper

D83.55-1112-09

1 Motor

2 V-belt

3 Low pressure switch

4 Electrical connector

9 Carrier plate

10 Nuts

11 Vibration damper

5 Nuts

6 Refrigerant compressor

7 Ground cable

8 Bolts

Remove/Install

Danger!

Risk of death caused by falling from vehicle roof. Risk of injury to other persons caused by falling objects during work in roof area.

Perform works on or in the area of the vehicle roof only on suitable auxiliary implements (ladders, scaffolding, assembly platforms). Secure working area adequately.

AS65.00-Z-0002-01B

Danger!

Risk of injury through leaking refrigerant and through contact with components of the refrigerant system

Wear protective clothing, safety gloves and safety glasses

AS86.61-Z-0002-01A

Notes on self-locking nuts and bolts

All models

AH00.00-N-0001-01A

1

Switch off roof air conditioning

See Operating Instructions

2

Remove web-type fuse

Of roof air conditioning in engine compartment

AR54.15-D-2100B

3

Remove cover of roof air conditioning on vehicle roof

AR83.30-D-1010A

4

Remove motor (1)

Motor of roof air conditioning refrigerant compressor

AR83.65-D-2070B

5

Remove V-belt (2) of the refrigerant compressor (6)

6

Detach electrical connector from low pressure switch (3)

7

Disconnect electrical connector (4)

8

Unscrew nuts (5).

9

Remove ground line (7)

10

Unscrew bolts (8) from carrier plate (9)

11

Remove carrier plate (9)

To do this, slightly lift up refrigerant compressor (6). Refrigerant compressor (6) does not have to be disconnected from refrigerant system (flexible refrigerant lines).

12

Unscrew nuts (10)

13

Remove vibration damper (11)

14

Install in the reverse order

Referenced documents