ar8355d5320a

Remove and install refrigerant compressor RPM sensor

Type ar · topic 83.55 · version 0101 · 2001-05-21

Applies to: MODELS 901.0 /3 /4, 902.0 /3 /4, 903.0 /3 /4, 904.0 /3 /4 with CODE (H06) Air conditioning

Where it sits

Function group 3 Body › 83 Climate control › 83.55 A/C compressor — Series 901 (models 0**, 3**, 4**) · Series 902 (models 0**, 3**, 4**) · Series 903 (models 0**, 3**, 4**) · Series 904 (models 0**, 3**, 4**)

EinPAS 39 Heating/ventilation/cooling › 39.15 Climate control › 39.15.12 Sensor/switch/wiring harness — Series 901 (models 0**, 3**, 4**) · Series 902 (models 0**, 3**, 4**) · Series 903 (models 0**, 3**, 4**) · Series 904 (models 0**, 3**, 4**)

AR83.55-D-5320A

Remove and install refrigerant compressor RPM sensor

8.1.96

MODELS 901.0 /3 /4, 902.0 /3 /4, 903.0 /3 /4, 904.0 /3 /4 with CODE (H06) Air conditioning

Remove and install refrigerant compressor RPM sensor

D83.55-0001-11

1 Contact strip

2 Contact pins

3 Screw

4 Line holder

5 Circlip

6 Rpm sensor

7 Washer

Removing, installing

1

Remove refrigerant compressor

AR83.55-D-5300A

2

Unscrew bolt (3) and remove lead clip (4) from the connecting lead of the RPM sensor (6)

3

Remove circlip (5)

4

Pull RPM sensor (6) with disk (7) out of the refrigerant compressor housing

5

Clip contact strip (1) on and remove RPM sensor contact pins (2)

Installation: Ensure that the contact pins are installed in the correct position

6

Install in the reverse order

Referenced documents