AR83.50-T-5115AA | Remove/install condenser blower bridge (roof equipment) | 15.1.03 |
MODELS NMB671.015 /020 /021 /030 /042 with CODE (HKA) Konvekta ACX 602 air conditioning with roof heater
T83.50-0021-06
1 Condenser blower bridge
2 Bolts
3 Electrical plug connections
4 Pin sockets
5 Electrical wiring
Arrow cable bushing
| Remove/install | ||
Danger! | Risk of injury from grazing or cutting body parts on sharp vehicle parts | Always wear protective gloves when working on or near sharp and untrimmed vehicle parts. Deburr metal repairs. | |
1 | Switch off ignition | Ensure that the air conditioning is switched off and the condenser blower does not run on. | |
2 | Remove paneling of condenser unit | ||
3 | Cut open tie strap and expose the electrical connector (3) | Installation: Attach new tie straps. | |
4 | Undo the electrical connectors (3) | ||
5 | Remove electrical lines (5) out of the pin sockets (4) | Mark assignment of electrical lines (5) on the pin sockets (4). | |
6 | Unscrew screw (2) | ||
7 | With an assistant, detach condenser blower bridge (1) | When removing from condenser blower bridge (1), pull out electrical lines (5) through the cable bushing (arrow). | |
8 | Install in the reverse order |
Referenced documents
- ar8350t5000aa Remove/install condenser unit paneling
- as0000z001701a Risk of injury caused by scraping or cutting body parts on sharp vehicle parts