AR83.50-D-6460CH | Remove/install air conditioning evaporator temperature sensor (roof equipment) | 18.7.11 |
MODEL 900 with CODE (HK4) Rear air conditioning, reinforced
D83.50-1315-09
1 Clip
2 Protective grille
3 Left evaporator
A32b2 Evaporator temperature sensor
4 Electrical connectors
5 Screw
| Remove/install | ||
Danger! | Risk of death caused by falling down from the roof of the vehicle. Risk of injury to other persons caused by falling objects during work in the area of the roof. | ||
| Information on preventing damage to electronic components due to electrostatic discharge | ||
1 | Remove roof air conditioning cover | ||
2 | Remove clips (1) and lift off protective grille (2) far enough from left evaporator (3) until the evaporator temperature sensor (A32b2) can be removed | ||
3 | Carefully pull evaporator temperature sensor (A32b2) out of left evaporator (3) | Installation: When installing, move evaporator temperature sensor (A32b2) only up to the center of the left evaporator (3). Otherwise the left evaporator (3) may be damaged and it will need to be replaced. | |
4 | Disconnect electrical connectors (4) | Installation: Observe installation position of electrical connections (4). | |
5 | Remove screws/bolts (5) and remove evaporator temperature sensor (A32b2) | ||
6 | Install in the reverse order |
Referenced documents
- ah5400p000101a Information on preventing damage to electronic components due to electrostatic discharge
- ar8330d1300ch Detach/attach cover of roof air conditioning
- as6500z000201a Risk of death caused by falling from vehicle roof. Risk of injury to other persons caused by falling objects during work in roof area.