AR83.50-D-6040A | Remove/install air conditioning control console (roof equipment) | 29.4.04 |
MODEL 903.662
with CODE (ZU8) National version for USA
with CODE (Z29) "James Cook" touring camper, NAFTA
Roof air conditioning
D83.50-1179-09
1 Electrical connector
2 Electrical connector
5 Control console
3 Bolts
4 Temperature sensor
| Remove/Install | ||
1 | Switch off roof air conditioning (8) | See Operating Instructions | |
2 | Remove wall cabinet cover panel | In right side of wall cabinet | |
3 | Remove wall cabinet cover panel | In right rear of wall cabinet | |
4 | Remove tie straps from electrical lines of control console (5) | Installation: use new tie straps. | |
5 | Disconnect electrical connector (1) | ||
6 | Disconnect electrical connector (2) | ||
7 | Remove screws (3) | ||
8 | Remove rear air nozzle | Remove only the air outlet that enables access to the temperature sensor (4) of the control console (5) at the evaporator becomes accessible. | |
Before removal, check the location of the temperature sensor (4) at the evaporator through the ventilation slots of the air outlets. | |||
9 | Remove control console (5) | Carefully pull out temperature sensor (4) from the horizontal wall cabinet to prevent damage to the evaporator or the temperature sensor (4). | |
Installation: Insert temperature sensor (4) again at evaporator to prevent rattling noises and inaccurate temperature control. | |||
10 | Install in the reverse order | ||
11 | Perform a function test | Switch roof air conditioning on/off (see operator's manual). |
Referenced documents
- ar8310d4800a Removing and installing rear air nozzle
- ar8660d005101a Remove/install cover panel from hanging cabinet
- ar8660d005101b Remove/ install cover panel from hanging cabinet