ar8340p6352da

Replacing bulbs on pushbutton control module for air conditioning (automatic)

Type ar · topic 83.40 · version 0100 · 1997-10-26

Applies to: MODEL 140 up to 31.8.95 "Kammerer" pushbutton control module

Where it sits

Function group 3 Body › 83 Climate control › 83.40 Air conditioning (automatic) — Series 140

EinPAS 39 Heating/ventilation/cooling › 39.15 Climate control › 39.15.33 Operating unit/cable — Series 140

AR83.40-P-6352DA

Replacing bulbs on pushbutton control module for air conditioning (automatic)

10.6.97

MODEL 140 up to 31.8.95
"Kammerer" pushbutton control module

Replacing bulbs on pushbutton control module for air conditioning (automatic)

P83.40-0455-11

a Bulb, spaghetti

Removal, installation

Bulb (a) on the left illuminates the left temperature dial and the fan dial
Bulb (a) on the right illuminates the right temperature dial

If any other lamps, such as the display illumination lamps or function lamps burn out replace the A/C pushbutton control module (N22)

AR83.40-P-6350D

1

Switch off ignition

2

Remove radio

3

Remove cover on center console

ra68001400235x

4

Replace bulb (a) by sliding a piece of spaghetti (a, dia. 5 mm) over the bulb (between the left and center pushbutton fields) and pull out bulb

5

Reinstall in opposite order

Installation: Before installing the cover on the center console check for proper function according to diagnosis manual

Referenced documents