ar8330t8087bas

Remove/install air outlet temperature sensor

Type ar · topic 83.30 · version 0100 · 2005-07-12

Applies to: MODEL NMB613.455 with CODE (HKB) Konvekta air conditioning ACX 641 SAPTCO without roof heater

Where it sits

Function group 3 Body › 83 Climate control › 83.30 Air conditioning — Series 613 (models 455)

EinPAS 39 Heating/ventilation/cooling › 39.15 Climate control › 39.15.12 Sensor/switch/wiring harness — Series 613 (models 455)

AR83.30-T-8087BAS

Remove/install air outlet temperature sensor

4.3.03

MODEL NMB613.455 with CODE (HKB) Konvekta air conditioning ACX 641 SAPTCO without roof heater

Remove/install air outlet temperature sensor

T83.30-0074-11

1 Recirculating air filter frame

2 Connector

B230 Ventilation duct temperature sensor

Remove/Install

1

Remove recirculating air filter frame (1) on the right rear

Replace recirculated air filter

AP83.10-T-8383BAS

2

Sever tie strap on the ventilation duct temperature sensor (B230) and connector (2)

Installation: Attach new tie straps.

3

Undo connector (2)

4

Install in the reverse order

Referenced documents