AR83.30-P-2007GH | Remove/install footwell flap actuator motor | 3.5.01 |
MODELS 163.113 #A as of 289565,
163.113 #X as of 754620,
163.154 /174 #A as of 289565,
163.128 /157 /175
P83.30-3559-06
1 Bracket
2 Bolts
3 Connector
4 Bolts
M2/15 Footwell flap actuator motor
X18 Interior and taillamp wiring harness connector, cockpit
| Remove/install | ||
1 | Remove cover below instrument panel (left) | ||
2.1 | Remove electronic transmission control (ETC) control module | Only on models fitted with automatic transmission. | |
3 | Disconnect interior and taillamp wiring harness connector, cockpit (X18) from bracket (1) | ||
4 | Remove screws (2) | ||
5 | Move bracket (1) downwards and put to one side | ||
6 | Disconnect connector (3) | ||
7 | Remove screws (4) on defroster vent flap actuator motor (M2/15) from heater housing | ||
8 | M2/15 Remove footwell flap actuator motor | Installation: Adjust footwell flap actuator motor (M2/15) to the 0 position using STAR DIAGNOSIS. | |
9 | Install in the reverse order |
Referenced documents
- ar2719p1719gh Removing and installing electronic transmission control (ETC) control module
- ar6810p1500gh Removing and installing cover below instrument panel (left)