ar8330d6540ts

Remove/install condenser

Type ar · topic 83.30 · version 0200 · 2018-06-01

Applies to: Model 907 with engine 642, 651

Where it sits

Function group 3 Body › 83 Climate control › 83.30 Air conditioning — Series 651 · Series 907

EinPAS 39 Heating/ventilation/cooling › 39.15 Climate control › 39.15.41 Condenser/drier/gas cooler — Series 651 · Series 907

Also applies to engines/gearboxes: 642 ***

AR83.30-D-6540TS

Remove/install condenser

18.05.2018

Model

907 with engine 642, 651

Modification notes

10.05.2018

Method extended.

Operation step 3.

Remove/install condenser

1

Condenser

2

Bracket

3

Guides

D83.30-1281-06

Danger

Risk of fire due to ignition of R1234yf refrigerant on hot components. Risk of poisoning caused by inhaling overheated refrigerant vapors. Risk of injury to skin and eyes caused by contact with escaped R1234yf refrigerant and when working on pressurized parts. Risk of explosion due to formation of ignitable refrigerant/air mixtures

Never perform welding work on or near a closed air conditioning system. No smoking or open flames. Wear safety glasses and protective gloves. Work only in well ventilated rooms. Carry out repair work on the air conditioning system circuit only after the system has been evacuated.

AS83.00-Z-0007-01A

Warning

Risk of poisoning caused by inhaling overheated refrigerant vapors from an air conditioning system containing R134a. Risk of injury to skin and eyes caused by contact with liquid R134a refrigerant and when working on pressurized parts

Never perform welding work on or near a closed air conditioning system. No smoking or open flames. Wear safety glasses and protective gloves. Work only in well ventilated rooms. Carry out repair work on the air conditioning system circuit only after the system has been evacuated.

AS83.00-Z-0006-01A

Topical note

Protect air conditioning circuit and components from moisture when carrying out repair work

AH83.30-N-0005-01A

Notes on handling refrigerant R1234yf

AH83.30-P-0003-02A

Notes on handling refrigerant R134a

AH83.30-N-0003-01A

Remove/install

1

Remove radiator.


Model 907 with engine 651

AR20.20-D-3865TS

Model 907 with engine 642

AR20.20-D-3865TSV

2

Remove condenser (1).

To do so, unclip holders (2) from guides (3).

If the condenser (1) is reused.

Replace the fluid reservoir.

Remove/install fluid reservoir

AR83.30-D-6520TSR

3

Transfer pressure sensor for refrigerant.

If the condenser (1) is replaced.

AR83.30-D-5445TSF

4

Install in the reverse order

Referenced documents