ar8325p1405gh

Remove/install cover at air intake

Type ar · topic 83.25 · version 0105 · 2002-09-12

Applies to: MODEL 163.113 /128 /136 /154 /157 /172 /174 /175

Where it sits

Function group 3 Body › 83 Climate control › 83.25 Automatic heater — Series 163 (models 113, 128, 136, 154, 157, 172, 174, 175)

EinPAS 39 Heating/ventilation/cooling › 39.15 Climate control › 39.15.32 Housing/heat exchanger/evaporator/filter — Series 163 (models 113, 128, 136, 154, 157, 172, 174, 175)

AR83.25-P-1405GH

Remove/install cover at air intake

3.3.97

MODEL 163.113 /128 /136 /154 /157 /172 /174 /175

Remove/install cover at air intake

P83.25-2012-06

1 Windshield wiper arms

2 Rubber seal

3 Cover

4 Nuts

5 Metal clips

6 Water deflector panel

Remove/install

Danger!

Injury hazard by trapping or crushing, in extreme cases with loss of limbs when reaching into windshield wiper mechanism

Always remove ignition key when working on windshield wiper mechanism.

AS82.30-Z-0001-01A

1

Remove wiper arms (1)

AR82.30-P-6100GH

2

Detach rubber seal (2) from firewall

3

Remove metal clips (5)

4

Unscrew nuts (4) at firewall

Remove foam insert.

5

Seal off washer fluid hose at check valve

6

Remove cover (3) together with water deflector panel (6)

If damaged, detach water deflector panel (6) from cover (3).

Installation: Lubricate upper edge of cover and windshield at bottom with soapy water.

7

Install in the reverse order

Referenced documents