ar8325p1402t

Remove/install water collector

Type ar · topic 83.25 · version 0102 · 2004-07-01

Applies to: MODEL 211.0/ 2/ 6

Where it sits

Function group 3 Body › 83 Climate control › 83.25 Automatic heater — Series 211 (models 0**, 2**, 6**)

EinPAS 35 Body/frame/detachable parts › 35.38 Bumper/spoiler/outer trim/stowage box/front protective paneling › 35.38.44 Trim/trim element/front protective paneling — Series 211 (models 0**, 2**, 6**)

AR83.25-P-1402T

Remove/install water collector

12.11.02

MODEL 211.0/ 2/ 6

Remove/install water collector

P83.25-2098-09

1 Water collector

2 Rubber seal

3 Gaskets

6 Clip

7 Water drain hose

4 Cable

5 Expanding clip

Remove/Install

1

Remove wiper arms

AR82.30-P-6100T

2.1

Remove multifunction sensor and place to one side with attached cable

On vehicles with code (581b) convenience automatic air conditioning

AR83.40-P-6730T

3

Remove rubber seal (2) in water collector area (1)

4

Detach gaskets (3) at the wiper shafts

5

Unclip line (4) for windshield washer nozzles

6

Remove expander clips (5) on water collector (1)

7

Unclip water collector (1) in the area of the windshield (arrows)

Installation: Replace defective clips (6).

8

Detach water drain hose (7) on water collector (1)

9

Remove water collector (1)

10

Install in the reverse order

Referenced documents