Removing and installing water collector · ar8325p1402f · Mercedes-Benz WIS

AR83.25-P-1402F

Removing and installing water collector

13.12.94

MODEL 210

P83.25-0274-06

1 Water collector

2 Plastic rivet

3 Main air flap

4 Smog sensor

5 Control module box

6 Wiper rubber pads

7 Wiper unit mount

8 Air intake clips

B31x1 Smog sensor connector

P83.25-0281-06

5 Control module box

9 Cover screw

10 Cover

11 Screw

12 Clamping screw

13 Engine control module

K40 Relay unit (HFM-SFI, HFM-LP, ME 1.0, EDC, basic function)

N10-1 Multi-function control module (convenience feature CF, windshield wiper, rear window defroster, box fan)

N15/1 5-speed automatic transmission control module (EATC)

N47-1 ASR/SPS control module

N47-2 ETS/SPS control module

 	Removal, installation
1	Remove left air inlet		AR83.25-P-1403F
2	Remove right air inlet		AR83.25-P-1404F
3	Remove windshield wiper		AR82.30-P-6400F
4	Remove rubber pads (6)
5	Remove windshield wiper mount (7) Unscrew screw
6	Unclip clips (8)
7	Remove plastic rivet (2)
8	Disconnect connector for smog sensor (B31x1)	Vehicles with air conditioning (automatic) (code 581)
9	Disconnect ground lead on battery	 Insulate terminal on ground lead to prevent unintentional contact between connected ground lead and ground point W10	AR54.10-P-0003A
10	Unscrew screws (9) and remove cover (10)	 Installation: Ensure that gasket for cover is properly seated
11	Remove control module N10-1 from control module box		AR54.20-P-1257-01A
12	Loosen clamping screw (12)
13	Unscrew screws (11) and move upper section of control module box (5) toward front
14	Remove water collector (1)	 When removing and installing the water collector (1) ensure that the main air flap is not damaged
15	Reinstall in opposite order