P83.25-0209-06
4 Water collector
5 Rubber wiper mount
6 Right mounting screw
8 Water drain
10 Wiring duct
P83.25-0212-06
4 Water collector
7 Clips on air intake
9 Water drain
15 Control module carrier
16 Hex. nut
P83.25-0203-06
11 Firewall center section
12 Clamp
13 Screw
14 Clip
15 Control module carrier
16 Hex. nut
| Removal, installation | ||
1 | Remove cover on left and right air intake | ||
2 | Remove wiper system | ||
3 | Unscrew rubber mount (5) | ||
4 | Unclip clips (7) | ||
5 | Unscrew screw (6) | ||
6 | Unhook wiring duct (10) | ||
7 | Detach fuel lines, remove clamp (12) | ||
8 | Remove firewall center section (11), unscrew screws (13), press off clips (14) | When installing the firewall center section ensure that the rubber grommet for the heater feed hose is seated properly. | |
9 | Remove control module carrier (15), unscrew hex. nuts (16) | ||
10 | Remove water collector (4) | When installing the water collector (4) ensure that the water drains (8 and 9) | |
11 | Reinstall in opposite order |
Referenced documents
- ar8230p6400e Removing and installing wiper system
- ar8325p1400e Removing and installing left and right air intake covers