ar8325d1124na

Remove and install air conditioning pushbutton control module

Type ar · topic 83.25 · version 0103 · 2003-09-22

Applies to: MODELS WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD4, XD5, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7 MODELS 903.61 /66 /67, 904.61 /66 with CODE (ZU7) National version for Canada MODELS 903.61 /66 /67, 904.61 /66 with CODE (ZU8) National version for USA MODELS 903.61 /62 /66 /67, 904.61 /62 /66 with CODE (ZU9) National version for Mexico

Where it sits

Function group 3 Body › 83 Climate control › 83.25 Automatic heater — Series 903 (models 61*, 62*, 66*, 67*) · Series 904 (models 61*, 62*, 66*)

EinPAS 39 Heating/ventilation/cooling › 39.15 Climate control › 39.15.11 Control unit/relay — Series 903 (models 61*, 62*, 66*, 67*) · Series 904 (models 61*, 62*, 66*)

EinPAS 39 Heating/ventilation/cooling › 39.15 Climate control › 39.15.33 Operating unit/cable — Series 903 (models 61*, 62*, 66*, 67*) · Series 904 (models 61*, 62*, 66*)

AR83.25-D-1124NA

Remove and install air conditioning pushbutton control module

8.2.01

MODELS WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD4, XD5, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7

MODELS 903.61 /66 /67, 904.61 /66 with CODE (ZU7) National version for Canada

MODELS 903.61 /66 /67, 904.61 /66 with CODE (ZU8) National version for USA

MODELS 903.61 /62 /66 /67, 904.61 /62 /66 with CODE (ZU9) National version for Mexico

Remove and install air conditioning pushbutton control module

D83.20-1101-11

1 Air conditioning pushbutton control module

2 Cable

3 Cable

4 Connector

5 Connector

6 Bolt

7 Bracket

Remove/Install

1

Remove center section of instrument panel

AR68.10-D-1030B

2

Remove bolts (6)

3

Identify cables (2 and 3) and remove from the air conditioning pushbutton control module (1)

Installation: The cable for the lower adjusting lever must be attached to the front adjusting knurl of the air conditioning control and operating unit.

4

Remove plugs (4 and 5)

5.1

Unscrew bracket (7) on both sides

Only if the control and operating unit for climate control is replaced.

6

Install in the reverse order

7.1

Set time on timer for auxiliary heater

With code H12, warm water auxiliary heater or code H86, timer for auxiliary heater.

Referenced documents