ar8325d1124fb

Remove and install air conditioning control and operating unit

Type ar · topic 83.25 · version 0100 · 2013-06-19

Applies to: MODEL 909 without CODE HH9 (Regulated air conditioning (Tempmatic))

Where it sits

Function group 3 Body › 83 Climate control › 83.25 Automatic heater — Series 909

EinPAS 39 Heating/ventilation/cooling › 39.15 Climate control › 39.15.11 Control unit/relay — Series 909

EinPAS 39 Heating/ventilation/cooling › 39.15 Climate control › 39.15.33 Operating unit/cable — Series 909

AR83.25-D-1124FB

Remove and install air conditioning control and operating unit

23.05.2013

MODEL

909

without CODE HH9 (Regulated air conditioning (Tempmatic))

Remove and install air conditioning control and operating unit

1

Climate control control and operating unit

2

Cable

3

Cable

4

Connector

5

Cable

6

Screw

7

Bracket

D83.20-1102-11

Remove/install

1

Remove stowage compartment below pen holder

2

Remove cover on center part of dashboard

AR68.10-D-1190F

3

Remove screw/bolts (6)

4

Remove wires (2, 3, 5) from climate control control and operating unit (1)

Installation: The wire (3) for the lower adjustment lever must be attached to the front air distribution adjusting knurl of the climate control control and operating unit (1). The wire (5) must be installed at the heater control adjusting knurl.

5

Unplug connector (4)

6

Remove bracket (7)

When replacing the climate control control and operating unit (1).

7

Install in the reverse order

Referenced documents