ar8325d1000e

Remove/install heater housing

Type ar · topic 83.25 · version 0100 · 2006-06-27

Applies to: MODEL 906.1 /2 /6 /7

Where it sits

Function group 3 Body › 83 Climate control › 83.25 Automatic heater — Series 906 (models 1**, 2**, 6**, 7**)

EinPAS 39 Heating/ventilation/cooling › 39.15 Climate control › 39.15.32 Housing/heat exchanger/evaporator/filter — Series 906 (models 1**, 2**, 6**, 7**)

AR83.25-D-1000E

Remove/install heater housing

13.6.06

MODEL 906.1 /2 /6 /7

Remove/install heater housing

D83.25-1110-06

1 Nuts

2 Bolt

3 Heater housing

Remove/install

1

Remove instrument panel support with instrument panel

AR68.10-D-1010B

2

Remove covers on instrument panel

AR68.10-D-1580A

3

Remove air ducts

AR83.25-D-1000-02E

4

Put down instrument panel support with instrument panel

Place instrument panel on soft base to protect it from scratches.

5

Detach all electrical connectors between the instrument panel and the heater housing (3)

6

Unscrew bolts (2) at connections to the instrument panel support

7

Unscrew nuts (1) at connections to the instrument panel support

If the heater housing is to be installed again: Hold grub screw steady at the end of the shaft when unscrewing the nuts. When a grub screw is unscrewed the connection between the grub screw and the heater housing is destroyed. This would mean that the heater housing has to be replaced, because it can no longer be securely fastened.

8

Remove heater housing (3) from instrument panel support

9

Remove PTC heater booster

When replacing the heater housing with electrical warm air auxiliary heater, code HH2 the PTC heater booster must be converted from the old to the new heater housing.

AR83.70-D-8000A

10

Install in the reverse order

Referenced documents