AR83.25-A-1000A | Remove/install heater housing | 7.6.01 |
MODELS 690.6 except CODE (HH9) Automatic air conditioning "Tempmatic"
D83.20-1108-06
1 Heater housing
2 Electrical wire
3 Electrical connector
4 Screw
Modification notes
| Remove/Install | ||
1 | Remove instrument panel | Installation: Adjust cables of air distribution and heater control: | |
| |||
Adjust air distribution control cables | |||
| |||
Adjust heater control cable | |||
Except with automatic heater control, "Heatmatic" code H25. | |||
2 | Detach ventilation box and put down on engine | Do not disconnect electrical connectors. | |
3 | Position suitable catch reservoir for coolant below vehicle | ||
4 | Remove connections from heater at front | ||
5 | Remove air ducts | ||
6 | Expose electrical line (2) and disconnect electrical connector (3) | ||
7 | Remove bolts (4). | ||
8 | Remove heater housing (1) | Installation: Ensure that electrical line (2) to ventilation box is routed properly. Check seals for the air outlet and inlet openings, replace if necessary. | |
9 | Install in the reverse order | ||
10.1 | Set time at instrument cluster | Except with tachograph Latin America code J05. | |
11 | Read diagnostic trouble code memory and erase | Stored faults which may be caused by disconnecting lines or by simulation during removal and installation or inspection work, must be processed and erased in the fault memories after completing the work. |
Referenced documents
- ar6810a1000a Remove and install instrument panel
- ar8310d001003a Detach/attach ventilation box
- ar8310d140001a Adjust air distribution control cables
- ar8320d140001a Adjust heater control cable
- ar8325d100001b Remove and install connections from and to front of heater housing
- ar8325d100002a Remove air ducts