W83.20-A008-78
Shown on model 959 with code J1A (Instrument cluster, 10.4 cm) |
1 | Cover | 3 | Blind | |
2 | Bolts | A1 | Instrument cluster (ICUC) control unit |
5 | Cable |
6 | Electrical connector |
7 | Plastic lug |
8 | Wire attachment |
9 | Screw |
11 | Switch panel |
A12b | Heating, ventilation and air conditioning control unit (HVAC) |
W83.20-A007-76
| Remove/install | ||
1 | Unclip cover (1) upward. | ||
2 | Remove screw/bolts (2) . | ||
3 | Unclip cover (3) above instrument cluster (ICUC) control unit (A1). | ||
4 | Remove switch panel (11) from instrument panel. | Pull out the switch panel (11) only until the electrical connector (6) and the wires (5) are accessible. | |
5 | Disconnect electrical connection (6). | ||
6 | Unclip electrical lines of electrical connector (6) from retaining clip. | ||
7 | Mark installation position of wires (5). | ||
8 | Unhook wires (5). | To do so, press plastic lugs (7) in direction of arrow and remove wires (5) from adjustment mechanism. | |
Installation: Note installation position of wires (5). | |||
9 | Remove wires (5). | To do so, fold over wire attachments (8). | |
10 | Remove screws (9) and remove heating, ventilation and air conditioning (HVAC) control unit (A12b). | ||
11 | Install in the reverse order |