ar8320w2000ne

Removing and installing heater pushbutton control module

Type ar · topic 83.20 · version 0100 · 2019-12-31

Applies to: Model 956

Where it sits

Function group 3 Body › 83 Climate control › 83.20 Heating — Series 956

EinPAS 39 Heating/ventilation/cooling › 39.15 Climate control › 39.15.11 Control unit/relay — Series 956

EinPAS 39 Heating/ventilation/cooling › 39.15 Climate control › 39.15.33 Operating unit/cable — Series 956

AR83.20-W-2000NE

Removing and installing heater pushbutton control module

13.12.2019

Model

956

Removing and installing heater pushbutton control module

W83.20-A016-78

1

Bolts

3

Control and operating unit

4

Retaining blocks

2

Bracket

Remove/install

1

Remove top center trim on instrument panel.

AR68.10-W-1497NE

2

Remove screws (1) and remove bracket (2).

3

Take out control and operating unit (3) until electrical connectors are accessible.

4

Disconnect electrical connectors from control and operating unit (3).

5

Remove retaining blocks (4) and detach wires from rollers.

Wires and rollers are marked in color.

6

Remove control and operating unit (3).

7

Install in the reverse order.

Referenced documents