ar8320p1400sm

Remove/install heater control cable

Type ar · topic 83.20 · version 0100 · 2005-11-03

Applies to: MODEL 450.3 /4 (except , 450.418)

Where it sits

Function group 3 Body › 83 Climate control › 83.20 Heating — Series 450 (models 3**, 400, 401, 402, 403, 414, 432, 433, 441, 442, 443, 452)

EinPAS 39 Heating/ventilation/cooling › 39.15 Climate control › 39.15.33 Operating unit/cable — Series 450 (models 3**, 400, 401, 402, 403, 414, 432, 433, 441, 442, 443, 452)

AR83.20-P-1400SM

Remove/install heater control cable

5.9.05

MODEL 450.3 /4 (except , 450.418)

Remove/install heater control cable

P83.20-2292-04

1 Heater/ventilation operating unit

2 Heater control cable

3 Catch

4 Clamp

5 Lever

Remove/install

1.1

Disconnect left and right tweeter

Only for vehicles with sound package
(2 tweeters, 2 bass reflex boxes and diplexer) (FFO), code C17.

See

Retrofit sound system

AZ82.62-P-0002SM

2

Remove instrument cluster

Do not disassemble instrument cluster.

AR54.30-P-6015SM

Installation: Variants and parameters of instrument cluster do not need to be programmed.

3

Remove cockpit clock

AR54.30-P-1000SM

4

Remove Tachometer

AR54.30-P-1100SM

5

Remove front center console

AR68.20-P-2010SM

6

Remove instrument panel

AR68.10-P-1000SM

7

Remove heater/ventilation operating
unit (1)

Only remove heater/ventilation operating unit (1) to the extent that the heater control cable (2) is accessible and can be removed.

AR83.20-P-1850SM

Installation: The heater control cable (2) must be adjusted after installing the heater/ventilation operating unit (1), see:.

Adjust heater/ventilation operating unit (1) cable

AR83.20-P-1850-01SM

8

Remove catch (3) from heater control cable (2) and unhook heater control cable (2) from heater/ventilation operating unit (1)

9

Remove clamp (4) from heater control cable (2) and unhook heater control cable (2) from lever (5) of air distribution box

10

Remove heater control cable (2)

Installation: When routing, ensure that heater control cable (2) can move freely and operates correctly.

Installation: The heater control cable (2) must be routed and secured in such a way that it is protected from damage and vibration.

11

Install in the reverse order

Referenced documents