ar8310s2500a

Removing and installing control cables from heater/ventilation control unit

Type ar · topic 83.10 · version 0102 · 1998-03-11

Applies to: MODEL 638.0 /1 /2

Where it sits

Function group 3 Body › 83 Climate control › 83.10 Ventilation — Series 638 (models 0**, 1**, 2**)

EinPAS 39 Heating/ventilation/cooling › 39.15 Climate control › 39.15.33 Operating unit/cable — Series 638 (models 0**, 1**, 2**)

AR83.10-S-2500A

Removing and installing control cables from heater/ventilation control unit

10.4.96

MODEL 638.0 /1 /2

Removing and installing control cables from heater/ventilation control unit

S83.10-2005-06

1 Clamp

2 Control cable

3 Clamp

4 Control cable

Removal, installation

1

Remove instrument panel

Only to remove control cable (2)

AR68.10-S-1000A

2

Unclip clips and unhook control cables (2) and (4) from heater/ventilation control unit

Remove control unit for heater/ventilation.

AR83.20-S-1835A

3

Remove clamp (1) and unhook control cable (2) from defrosting diffuser.

4

Remove clamp (3) and unhook control cable (4) from gate for the interior air diffuser.

5

Remove control cables (2) and (4)

6

Reinstall in opposite order

Check carefully if the two gates open or close completely when the control cables are activated.

Referenced documents