Remove and install left center nozzle air flap actuator motor · ar8310p2015h · Mercedes-Benz WIS

AR83.10-P-2015H

Remove and install left center nozzle air flap actuator motor

24.8.06

MODEL 240
Frontklimaanlage

P83.10-2327-06

1 Jacket tube

2 Instrument panel carrier

3 Bolt

4 Retaining plate

5 Bolt

6 Electrical connector

M2/12 Left center outlet flap actuator motor

 	Remove/install
	Notes on carrying out repair work in the vehicle interior		AH68.00-P-0001-01H
1	Remove instrument panel	 Place instrument panel on a suitable surface.	AR68.10-P-1000H
2	Detach side air duct bracket on the jacket tube (1) and remove the air ducts in the footwell
3	Remove jacket tube (1) from instrument panel carrier (2)	 When lowering the jacket tube (1) protect the floor mat in the footwell, otherwise the floor mat may become dirty.	AR68.10-P-1111-01H
		Lower bolt for jacket tube on cross member below instrument panel	*BA46.10-P-1001-03H
		Upper bolt for jacket tube on cross member below instrument panel	*BA46.10-P-1002-03H
		 Bolt, reinforcement brace of jacket tube to body	*BA46.10-P-1003-03H
4	Unscrew bolts (3) and remove retaining plate (4)
5	Unscrew bolt (5).
6	Remove left center air outlet flap actuator motor (M2/12) and disconnect electrical connector (6)
7	Install in the reverse order

 Jacket tube

Number	Designation		Model 240


BA46.10-P-1001-03H	Lower bolt, jacket tube to cross member below instrument panel	Nm	20
BA46.10-P-1002-03H	Upper bolt, jacket tube to cross member below instrument panel	Nm	20
BA46.10-P-1003-03H	Bolt, jacket tube reinforcement brace to body	Nm	20