AR83.10-P-2011QA | Remove/install right fresh air flap actuator | 22.5.03 |
MODEL 209.4 with CODE (581b) Convenience automatic air conditioning
P83.10-2435-09
1 Tunnel cross screws on cross member
2 Tunnel cross screw left on main floor
7 Vapor barrier
M2/20 Right fresh air flap positioning motor
3 Tunnel cross screw right on main floor
4 Bolts
5 Electrical connector
6 Tunnel cross
Modification notes
| Removal/installation | ||
1 | Remove instrument panel | ||
2 | Remove reinforcement center console with air ducts for rear compartment ventilation | Installation: Using tie straps, tie together lines that run through the center console reinforcement. | |
3 | Remove screws, tunnel cross to cross member (1) | | |
4 | Remove screws, left tunnel cross to main floor panel (2) | | |
5 | Remove screws, right tunnel cross to main floor panel (3) | | |
6 | Remove tunnel cross (6) | ||
7 | Remove damper (7). | ||
8 | Remove bolts (4) | ||
9 | Remove right vent flap actuator motor (M2/20) | ||
10 | Disconnect plug and socket connection (5) | ||
11 | Install in the reverse order | ||
12 | Connect STAR DIAGNOSIS, normalize right fresh air flap actuator (M2/20), read out and erase fault memory | ||
| Connect STAR DIAGNOSIS and read out fault memory | ||
Diagnosis system STAR DIAGNOSIS | |||
13 | Perform function check |
Cross member below instrument panel
Number | Designation | Model | ||
BA68.10-P-1004-02A | Tunnel cross screw on cross member | Nm | 20 | |
BA68.10-P-1005-02A | Tunnel cross screw left on main floor | Nm | 70 | |
BA68.10-P-1006-02A | Tunnel cross screw right on main floor | Nm | 20 | |
Commercially available tools
Referenced documents
- ad0000p200004a Connect STAR DIAGNOSIS and read out fault memory
- ad0000p200004a
- ar6810p1000q Remove/install dashboard