ar8310p2007tx

Remove/install actuator motor for right footwell flap

Type ar · topic 83.10 · version 0101 · 2019-03-29

Applies to: Model 219.3 with code 581 (Automatic air conditioning)

Where it sits

Function group 3 Body › 83 Climate control › 83.10 Ventilation — Series 219 (models 3**)

EinPAS 39 Heating/ventilation/cooling › 39.15 Climate control › 39.15.30 Blower motor/actuator motor — Series 219 (models 3**)

AR83.10-P-2007TX

Remove/install actuator motor for right footwell flap

08.03.2019

Model

219.3

with code 581 (Automatic air conditioning)

Remove/install actuator motor for right footwell flap

1

Bolts

2

AC housing

3

Electrical connector

M2/11

Right footwell flap actuator motor

P83.10-2464-04

Remove/install

1

Remove crossmember below dashboard

AR62.30-P-1250TX

2

Unscrew screws (1) using cordless drill/driver

3

Remove right footwell flap actuator motor (M2/11) from air conditioner housing (2) and disconnect electrical connector (3)

Instructions for installing actuator motors

AH83.10-P-0001-01R

Installation: Check condition of adjustment mechanism for right footwell flap. When replacing the right footwell flap actuator motor (M2/11), the position of the right footwell flap drive shaft must be aligned with the position of the actuator motor on the right footwell flap actuator motor (M2/11).

4

Install in the reverse order

5

Synchronize the actuator motors

Connect STAR DIAGNOSIS and read out fault memory

AD00.00-P-2000-04TX

Menu item, Actuation, Normalization of actuator motors.

Referenced documents