ar8310p2002tx

Remove and install left blend air flap actuator motor

Type ar · topic 83.10 · version 0100 · 2006-07-26

Applies to: MODEL 219.3

Where it sits

Function group 3 Body › 83 Climate control › 83.10 Ventilation — Series 219 (models 3**)

EinPAS 39 Heating/ventilation/cooling › 39.15 Climate control › 39.15.30 Blower motor/actuator motor — Series 219 (models 3**)

AR83.10-P-2002TX

Remove and install left blend air flap actuator motor

3.9.04

MODEL 219.3

Remove and install left blend air flap actuator motor

P83.10-2458-04

1 Electrical connector

2 Bolts

3 A/C housing

M2/6 Left blending air flap actuator motor

Remove/Install

1

Remove top section of instrument panel

AR68.10-P-1020TX

2

Disconnect electrical connector (1).

3

Undo screws (2) and remove left blending air flap actuator motor (M2/6) from the A/C housing (3)

Installation: Check condition of adjuster mechanism for left blend air flap.
When replacing the left blending air flap actuator motor (M2/6), the position of the left blend air flap axle shaft has to be matched to the position of the actuator drive on the left blending air flap actuator motor (M2/6).

Information on installing actuator motors

AH83.10-P-0001-01TX

4

Install in the reverse order

5

Synchronize the actuator motors

Menu item, Actuation, Normalization of actuator motors

Connect STAR DIAGNOSIS, read out fault memory

AD00.00-P-2000-04TX

Diagnosis system STAR DIAGNOSIS

*WH58.30-Z-1048-13A

Commercially available tools

Number

Designation

WH58.30-Z-1048-13A

STAR DIAGNOSIS diagnosis system, Compact Passenger Car

6511 1801 00

Referenced documents