Remove and install left blend air flap actuator motor

AR83.10-P-2002MEA

Remove and install left blend air flap actuator motor

18.12.2019

Model

167

with code 581 (Automatic air conditioning)

except code 580 (Air-conditioning system)

Shown on model 167.### 1#

1

Expansion rivet

6

Electrical connector

2

Air duct

7

Screw

3

Electrical connector

M2/8

Left blending air flap actuator

Shown on removed air conditioner housing, model 167.### 2#

4

Air distributor housing

7

Screw

5

AC housing

M2/8

Left blending air flap actuator

6

Electrical connector

 

Remove/install

1.1

Remove driver's side knee airbag.

Model 167.### 1#
with code 581 (Automatic air conditioning)
except code 580 (Air-conditioning system)

AR91.60-P-0200ME

1.2

Remove air conditioner housing.

Model 167.### 2#
with code 581 (Automatic air conditioning)
except code 580 (Air-conditioning system)

AR83.30-P-5200ME

2.1

Remove expansion rivet (1), take out air duct (2) and, while doing so, release and disconnect electrical connector (3).

Model 167.### 1#
with code 581 (Automatic air conditioning)
except code 580 (Air-conditioning system)

 Dismantling tool

*000589956300

2.2

Remove air distributor housing (4) from evaporator housing (5).

Model 167.### 2#
with code 581 (Automatic air conditioning)
except code 580 (Air-conditioning system)

AR83.30-P-5201ME

3

Release and disconnect electrical connector (6).

4

Unscrew screws (7) and left air mixing flap actuator motor (M2/8).

5

Install in the reverse order.

6

Using the vehicle diagnosis system, teach-in the left air mixing flap actuator motor (M2/8), then normalize it and delete the fault memory.



AD00.00-P-2000-06ME

 Menu point :
Adaptations 
Teach-in processes 
Teach-in of actuator motors 
Normalizing of positioning motors