ar8310p2002me

Remove and install left blend air flap actuator motor

Type ar · topic 83.10 · version 0100 · 2020-01-20

Applies to: Model 167 with code 580 (Air-conditioning system)

Where it sits

Function group 3 Body › 83 Climate control › 83.10 Ventilation — Series 167

EinPAS 39 Heating/ventilation/cooling › 39.15 Climate control › 39.15.30 Blower motor/actuator motor — Series 167

AR83.10-P-2002ME

Remove and install left blend air flap actuator motor

18.12.2019

Model

167

with code 580 (Air-conditioning system)

Remove and install left blend air flap actuator motor

P83.10-A033-09

Shown on removed air conditioner housing, model 167.### 2#

1

Electrical connector

6

Screw

2

Electrical wiring harness

7

Electrical connector

3

Housing

8

Screw

4

Lever

M2/8

Left blending air flap actuator

5

Lever

Remove/install

1

Remove air conditioner housing.

AR83.30-P-5200ME

2

Remove air distributor housing from evaporator housing.

Model 167.### 2#
with code 580 (Air-conditioning system)

AR83.30-P-5201ME

3

Release and disconnect electrical connections (1).

4

Remove electrical wiring harness (2) from housing (3).

5

Unclip lever (4).

6

Unclip lever (5) and place to one side.

7

Unscrew screws (6) and carefully remove housing (3).

Installation: Ensure that gearwheel is seated correctly in the adjustment lever (arrow).

8

Release and disconnect electrical connector(7).

9

Unscrew screws (8) and remove left air mixing flap actuator motor (M2/8).

10

Install in the reverse order.

11

Using the vehicle diagnosis system, teach-in the left air mixing flap actuator motor (M2/8), then normalize it and delete the fault memory.

AD00.00-P-2000-06ME

Menu point :
Adaptations 
Teach-in processes 
Teach-in of actuator motors
Normalizing of positioning motors

Referenced documents