ar8310p2002gm

Remove and install left blend air flap actuator motor

Type ar · topic 83.10 · version 0110 · 2019-04-30

Applies to: Model 463.202/236/237/346 up to model year 2013 Model 463.222/243/244/245/246/247/248/249/250/254/270/271/303/306/309/322/323/332/333/336/340/341 up to model year 2013

Where it sits

Function group 3 Body › 83 Climate control › 83.10 Ventilation — Series 463 (models 202, 222, 236, 237, 243, 244, 245, 246, 247, 248, 249, 250, 254, 270, 271, 303, 306, 309, 322, 323, 332, 333, 336, 340, 341, 346)

EinPAS 39 Heating/ventilation/cooling › 39.15 Climate control › 39.15.30 Blower motor/actuator motor — Series 463 (models 202, 222, 236, 237, 243, 244, 245, 246, 247, 248, 249, 250, 254, 270, 271, 303, 306, 309, 322, 323, 332, 333, 336, 340, 341, 346)

AR83.10-P-2002GM

Remove and install left blend air flap actuator motor

16.04.2019

Model

463.202/236/237/346

up to model year 2013

Model

463.222/243/244/245/246/247/248/249/250/254/270/271/303/306/309/322/323/332/333/336/340/341

up to model year 2013

Remove and install left blend air flap actuator motor

P83.10-2182-09

1

Screw

3

Electrical connector

M2/6

Left blending air flap actuator

Remove/install

1

Deactivate service mode in Telematic Alarm Identification on Demand (emergency call system) (TELE AID)


Model 463.243/244/245/250/309/322/323/332/333, 463.247/248/254/270 up to 4/1/07
up to model year 2013
with code ET2 (MB phone with integr. Tele Aid emergency call sys.)

AR82.95-P-0005-03GR

Information on Tele Aid emergency call system

Model 463.243/244/245/250/309/322/323/332/333, 463.247/248/254/270 up to 4/1/07
up to model year 2013
with code ET2 (MB phone with integr. Tele Aid emergency call sys.)

AH82.95-P-0001-01GA

Only for model 463.243/244/245/250/309/
322/323/332/333 with code (ET2) Tele Aid car telephone emergency call system,
463.247/248/254/270 to 1.4.07
with code (ET2) Tele Aid car telephone emergency call system

Danger

Risk of explosion from explosive gas. Risk of poisoning and caustic burns from swallowing battery electrolyte. Risk of injury through burns to skin and eyes from battery acid or when handling damaged lead-acid batteries

No fires, sparks, open flames or smoking. Wear acid-resistant gloves, clothing and glasses. Only pour battery acid into suitable and appropriately marked containers.

AS54.10-Z-0001-01A

2

Remove ground line at battery


Model 463.202/237/346
up to model year 2013
Model 463.222/243/244/245/246/247/249/250/254/270/271/303/306/309/322/323/332/333/336/340/341
up to model year 2013
Model 463.236
up to model year 2013
except code 979 (Special protection MB Guard)
Model 463.248
up to model year 2008
except code 979 (Special protection MB Guard)

AR54.10-P-0003G

Topical note

Notes on battery

AH54.10-P-0001-01A

Model 463.236/248
up to model year 2013
with code 979 (Special protection MB Guard)
with code E26 (Auxiliary battery)
with code ZS6 (Special protection version FB6)
with code ZS7 (Special protection version FB7)

AR54.10-P-0003PM

3

Remove cover below dashboard

AR68.10-P-1500GM

Left side only.

4

Remove bolt (1)

5

Remove left blend air flap actuator motor (M2/6)

6

Disconnect electrical connector (3) from left air mixing flap actuator motor (M2/6)

7

Install in the reverse order

8

Activate service mode in TELE AID


Model 463.243/244/245/250/309/322/323/332/333, 463.247/248/254/270 up to 4/1/07
up to model year 2013
with code ET2 (MB phone with integr. Tele Aid emergency call sys.)

AR82.95-P-0005-03GR

Information on Tele Aid emergency call system

Model 463.243/244/245/250/309/322/323/332/333, 463.247/248/254/270 up to 4/1/07
up to model year 2013
with code ET2 (MB phone with integr. Tele Aid emergency call sys.)

AH82.95-P-0001-01GA

Only for model 463.243/244/245/250/309/
322/323/332/333 with code (ET2) Tele Aid car telephone emergency call system,
463.247/248/254/270 to 1.4.07
with code (ET2) Tele Aid car telephone emergency call system

9

Read out fault memory and erase

AD00.00-P-2000-04A

After work is complete, faults stored in the fault memory must be processed and erased.
The stored faults may be caused by disconnected lines during assembly or test work as well as by a simulation.

10

Normalize left air mixing flap actuator motor (M2/6)

11

Perform basic programming

AR00.19-P-0200P

Referenced documents