ar8310p2002fr

Remove and install left blend air flap actuator motor

Type ar · topic 83.10 · version 0100 · 2018-07-31

Applies to: Model 257, 290

Where it sits

Function group 3 Body › 83 Climate control › 83.10 Ventilation — Series 257 · Series 290

EinPAS 39 Heating/ventilation/cooling › 39.15 Climate control › 39.15.30 Blower motor/actuator motor — Series 257 · Series 290

AR83.10-P-2002FR

Remove and install left blend air flap actuator motor

14.06.2018

Model

257, 290

Remove and install left blend air flap actuator motor

Shown on model 257.### 1#

1

Electrical connectors

2

Bolts

M2/8

Left blending air flap actuator

P83.10-2931-04

Remove/install

1.1

Remove trim under driver's side instrument panel.

Model 257.### 1# , 290.### 1#

AR68.10-P-1501FR

1.2

Remove air conditioner housing.

Model 257.### 2# , 290.### 2#

AR83.30-P-5200FR

2

Disconnect air distribution housing from evaporator housing.

Model 257.### 2# , 290.### 2#

AR83.30-P-5201FR

3

Disconnect electrical connectors (1).

4

Remove bolts (2) and remove left air mixing flap actuator motor (M2/8).

5

Install in the reverse order.

6

Using the vehicle diagnosis system, teach-in the left air mixing flap actuator motor (M2/8), then normalize it and delete the fault memory.

AD00.00-P-2000-06FR

Menu point :
Adaptations 
Teach-in processes 
Teach-in of actuator motors
Normalizing of positioning motors

Referenced documents