Remove/install cable from blend air flap · ar8310p1440ak · Mercedes-Benz WIS

AR83.10-P-1440AK

Remove/install cable from blend air flap

1.7.04

Model 169.0 /3, 245.2
except CODE (580) Automatic air conditioning
except CODE (581) Comfort automatic air conditioning

P83.10-2446-06

Illustrated on model 169

1 Cable

2 Instrument panel

3 Blend air flap lever

4 Heater housing

5 Retaining clamp

N18 HEAT [HAU] control and operating unit

 	Remove/install
1	Remove cover below instrument panel on right		AR68.10-P-1520AK
2	Pull out floor covering at side of right footwell behind instrument panel (2) and center console and fold to one side	 Installation: Ensure that floor covering at side of right footwell behind instrument panel and center console is seated correctly.
3	Remove cable (1) from blend air flap lever (3)
4	Release catch hook (arrows) on cable (1) using suitable screwdriver and pull cable (1) out of mounting on heater housing (4)	 Installation: Ensure that catch hooks (arrow) are properly seated on cable (1) in mounting on heater housing (4).
5	Remove HEAT [HAU] control and operating unit cover (N18)		AR68.20-P-2314AK
6	Release retaining clamp (5) of cable (1) on HEAT [HAU] control and operating unit (N18) and remove	 Carefully release cable (1) so that the retaining clamp (5) does not snap off.
7	Take out cable (1) toward the rear between instrument panel (2) and heater housing (4)	 Installation: Ensure that cable (1) is properly routed between instrument panel (2) and heater housing (4).
8	Install in the reverse order