ar8310p1430sm

Remove/install air recirculation flap cable

Type ar · topic 83.10 · version 0100 · 2005-11-03

Applies to: MODEL 450.3 /4 (except , 450.418)

Where it sits

Function group 3 Body › 83 Climate control › 83.10 Ventilation — Series 450 (models 3**, 400, 401, 402, 403, 414, 432, 433, 441, 442, 443, 452)

EinPAS 39 Heating/ventilation/cooling › 39.15 Climate control › 39.15.33 Operating unit/cable — Series 450 (models 3**, 400, 401, 402, 403, 414, 432, 433, 441, 442, 443, 452)

AR83.10-P-1430SM

Remove/install air recirculation flap cable

5.9.05

MODEL 450.3 /4 (except , 450.418)

Remove/install air recirculation flap cable

P83.10-2557-04

1 Heater/ventilation operating module

2 Air recirculation cable

3 Catch

4 Clamp

5 Lever

Remove/install

1.1

Disconnect left and right tweeter

Only for vehicles with sound package
(2 tweeters, 2 bass reflex boxes and diplexer) (FFO), code C17.

See

Retrofit sound system

AZ82.62-P-0002SM

2

Remove instrument cluster

Do not disassemble instrument cluster.

AR54.30-P-6015SM

Installation: Variants and parameters of instrument cluster do not need to be programmed.

3

Remove cockpit clock

AR54.30-P-1000SM

4

Remove Tachometer

AR54.30-P-1100SM

5

Remove front center console

AR68.20-P-2010SM

6

Remove instrument panel

AR68.10-P-1000SM

7

Remove catch (3) from air recirculation cable (2) and unhook air recirculation cable (2) from heater/ventilation operating
unit (1)

8

Remove clamp (4) from air recirculation cable (2) and unhook air recirculation cable (2) from lever (5) of air recirculation unit

9

Remove air recirculation cable (2)

Installation: When routing, ensure that air recirculation cable (2) can move freely and operates correctly.

Installation: The air recirculation cable (2) must be routed and secured in such a way that it is protected from damage and vibration.

10

Install in the reverse order

11

Adjust air recirculation cable (2)

AR83.20-P-1850-01SM

Referenced documents