ar8310p1411mfb

Remove/install cover for air/water duct

Type ar · topic 83.10 · version 0200 · 2019-08-27

Applies to: Model 247

Where it sits

Function group 3 Body › 83 Climate control › 83.10 Ventilation — Series 247

EinPAS 35 Body/frame/detachable parts › 35.38 Bumper/spoiler/outer trim/stowage box/front protective paneling › 35.38.44 Trim/trim element/front protective paneling — Series 247

AR83.10-P-1411MFB

Remove/install cover for air/water duct

23.08.2019

Model

247

Modification notes

23.08.2019

Remove outer nuts from air/water duct cover (1).

Operation step 3.

Remove/install cover for air/water duct

Shown on model 247.0

1

Air/water duct cover

2

Cover

3

Electrical connectors

4

Bracket (7 ea.)

5

Sealing lip

6

Gap

7

Seal

P83.10-A005-06

Remove/install

1

Remove wiper arms.

AR82.30-P-6100MFA

2

Remove left and right covers (2).

Model 247.0/7

3

Remove outer nuts from air/water duct cover (1).

Model 247.6

4

Release and disconnect electrical connectors (3), and detach electrical wiring harnesses from air/water duct cover (1).

The number of electrical connectors (3) varies depending on the vehicle equipment.

5

Release brackets (4) and remove air/water duct cover (1).

Installation: Make sure that the sealing lip (5) is completely inserted into the gap (6).
Make sure that the holders (4) are correctly locked.

6

Transfer seal (7).

When replacing the air/water duct cover (1).

7

Install in the reverse order.

Referenced documents